Support

Customer Service

News & Events

Other Narda
Group Companies:

Satellite Networks

Support - Software Downloads

Low Frequency Software

EFA-TS Software

Software for remote control and data analysis for EFA-200/300

• supports remote control function and data export
• transfers the data from the device memory.
• saves the data on the PC.
• analyses the data and permits representative graphical presentation of the results in the form of a measurement protocol.
• interface for Windows for device configuration and/or remote control.
• displays the memory data in five different ways.
• additional analysis functions.
• export functions.

Demo Software (Release 1.04 - 4.5MB)

EFA-Tools

The EFA is shipped with a diskette containing the "EFA-200/300 Tools" software.

This software has three components:

datalog.exe
Exports measurement data from the basic unit or from the E-field unit to a PC for further processing.

stnds.exe
Transfers user-selectable STANDARDS to the basic unit or the E-field unit.

conf.exe
Loads current firmware on the basic unit or the E-field unit. This is used to enable further operating modes in the basic unit or the E-field unit.

EFA Tools (1.3MB)

EFA-200/300 Firmware

For upgrading EFA-200/300 Firmware

This includes basic unit and E-Field probe.
Note: When downloading firmware to P.C., file must be saved with *.sof extension.
(see chapter 10.2.3 of the operation manual for further instructions)

Firmware (Release 2.04 - 640KB)

EHP - 50C and EHP - 200 Software

Remote Control and Configuration Software

Software to configure and display swept data from either sensor.
Software to download and display stored field reading from either sensor.

Software (Release 1.31 - 3.5MB)

Low Frequency Simulation Software

EFC - 400 / EFC - 400ST

Low Frequency Simulation

EFC - 400 Power Line Simulation

Simulation software for calculating fields caused by power lines

Frequency range: 0 Hz to 500 Hz

EFC - 400ST Transformer Station Simulation

Simulation software for calculating fields on transformer stations
(excerpt from EFC-400)

Frequency range: 0 Hz to 500 Hz

Capability	EFC-400	EFC-400ST
Magnetic field (H)	Yes	Yes
Electrical Field (E)	Yes	No
Correct-Phase Processing of Different Field Sources	Yes	Yes
Library of Pre-Defined Masts	Yes	No
Imports Maps, Sketches, Construction Plans	Yes	Yes
Exports ISO Lines, Color Surface Diagrams, etc.	Yes	Yes
Terrain Topography Processing in Grid or Vector Format	Yes	Yes
3D Calculations	Yes	Yes
Measurement Data Processing (e.g. from EFA)	Yes	Yes
Documentation Meets Requirements of Standards (VDE, BImSchV, DIN, ICNIRP)	Yes	Yes

High Frequency Software

EFC-400TC

Demo Software
High Frequency Version (103MB)

SRM Tools

Configuration-Software for the SRM-3000

Demo Software (Release 2.2.1 - 7MB)

SRM-TS

Software (Release 1.2.1 - 7MB)

SRM-Firmware

Firmware (Release 1.5.6 - 7MB)

NBM-TS

Transfer Set Software for NBM 550 and NBM 520

NBM-TS Software

Demo Software (Release 2.1.1 - 5.4MB)

Download Now! · Manual

NBM Firmware

Firmware Updates for the NBM-520 / NBM-550

NBM-550 Firmware (Version 1.2.0)

NBM-520 Firmware (Version 1.2.0)

EMR-TS 1.02 - Software

Transfer Set with Remote Control Software for EMR meters

• Remote control of EMR devices

• Read-out of actual and stored measurement data

(Release 1.02 - 5.4 MB)

8718B-Software

Remote Control Software for 8718B-type Meters

• Displays of measuring data in tabular format or as bar graph

• Printout of the screen content

• Export and conversion to other text or table programs possible

• Automatic recording of meter and probe model numbers, serial numbers and calibration dates

Software (Release 3.2 - 7.4MB)

EMR Survey Meter Configuration Software

Configuration software for EMR Series Meters

Prior to operating any additional probe, it is necessary to enter the characteristic and basic sensitivity of each probe to the basic model EMR-200/300.

The probe type is automatically recognized by the basic device.

Software (Release 2.0.7 - 1.2 MB)

8718-Software

Software for Discontinued 8718 Meters

Software (Release 2.61 - 556 KB)

Area Protection Software

2600 Software

Software for Narda Area Monitor System 2600

Software (Release 3.12 - 136 KB)